! =============================================================================
! LCLS XRAY BEAM LINE MAD file
! Modification History:
! ------------------------------------------------------------------------------
! 21-OCT-2007, P. Emma
!    Space BXPM magnets by 30 cm each along z-axis and add FSHTR, ST3, BTMST3,
!    and PCOLL.
! 11-SEP-2007, P. Emma
!    Change "BXBP..." to "DXPM..." in SBEN definitions.
! 07-NOV-2007, P. Emma
!    Add stuff from J. Langton.
! 26-NOV-2006, P. Emma
!    Setup intial file to allow x-ray beamline generation from main LCLS MAD
!    file.
! ==============================================================================

  DXPM1A : SBEN, L=LBpm/2, ANGLE=1E-15   ! permanent magnet safety dump as seen by x-rays (no bend angle)
  DXPM1B : SBEN, L=LBpm/2, ANGLE=1E-15
  DXPM2A : SBEN, L=LBpm/2, ANGLE=1E-15
  DXPM2B : SBEN, L=LBpm/2, ANGLE=1E-15
  DXPM3A : SBEN, L=LBpm/2, ANGLE=1E-15
  DXPM3B : SBEN, L=LBpm/2, ANGLE=1E-15

  FSHTR  : INST                     ! fast shutter
  ST3    : INST,L=LSTPR             ! X-ray insertable stopper ("LSTPR" parameter defined in main MAD file)
  BTMST3 : INST                     ! Burn-Through-Monitor behind ST3
  PCOLL  : ECOL,L=0,XSIZE=1,YSIZE=1 ! photon collimator (sizes and length still need updating)

  DPM    : DRIFT, L= 0.300000
  DPM2a  : DRIFT, L=10.887199
  DPM2b  : DRIFT, L= 0.023175
  DST3   : DRIFT, L= 0.111125
  DPM2c  : DRIFT, L= 0.313700

  XRAYBL : LINE=(DXPM1A,DXPM1B,DPM,DXPM2A,DXPM2B,DPM,DXPM3A,DXPM3B,&
                  DPM2a,FSHTR,DPM2b,ST3,DST3,BTMST3,DPM2c,PCOLL)