Skip to: main navigation | content
SLAC Detailed Index | People Search | Sitemap
SSRL Account#:
Spokesperson's Use Agreement valid until:
Contact Michelle Steger (650-926-3011) to open a user account. A use agreement is required from the home institution for all on-site users.
EXPERIMENTAL SETUP ASSIGNED
This information is based on your Beam Time Request Form. If you want to change your experimental setup, or if you are not sure what was originally requested, please contact User Administration immediately. LATE CHANGES ARE SUBJECT TO APPROVAL BY USER ADMINISTRATION AND SUPPORT.
Comments:
BIOHAZARDOUS MATERIALS USE? yes no If yes, what type and what is the materials NIH classification?
HUMAN OR ANIMAL SUBJECT USE? yes no If yes, what type? *Please contact SSRL Safety Office for further guidance.
RADIOACTIVE MATERIALS USE? yes no If yes, what is the materials specific activity?
*Radioactive substances may not be brought directly to SSRL. They first must be shipped or taken to Operational Health Physics, Bldg. 24, MS 84, 2575 Sand Hill Rd., Menlo Park, CA 94025; please contact Carol Morris at 650-926-3023 or Jim Allen at 650-926-4064.
LASER USE yes no If yes, please fill out all of the fields in this section.
If yes, please fill out all of the fields in this section.
HAZARDOUS EQUIPMENT/ELECTRICAL EQUIPMENT? yes no If yes, describe any hazardous/electrical equipment you will be bringing to SSRL. Indicate if it is a commercial product and if it has been altered in any way. Electrical equipment brought with you for use at SSRL must be certified by a Nationally Recognized Testing Laboratory. If your equipment is not certified, please contact the SSRL Safety Office for guidance on obtaining certification for your equipment under SLAC's Electrical Equipment Inspection Program (EEIP).
If yes, describe any hazardous/electrical equipment you will be bringing to SSRL. Indicate if it is a commercial product and if it has been altered in any way.
Electrical equipment brought with you for use at SSRL must be certified by a Nationally Recognized Testing Laboratory. If your equipment is not certified, please contact the SSRL Safety Office for guidance on obtaining certification for your equipment under SLAC's Electrical Equipment Inspection Program (EEIP).
X-ray Energy: keV Monochromator calibration edge (i.e., Cu, Mg, etc.) Other:
Ultracentrifuge Stereomicroscope Spectrophotometer Fume Hood
Glove Box (SMB) Ultrapure Water Bench Space Cold Room Anaerobic Chamber (MEIS)
Other:
Please be sure to indicate which members of your group will need access to one of our Sample Preparation Laboratories by clicking on the checkbox in the collaborator section above.
What q range is appropriate for your experiments? Please number in sequence of intended use if more than one range applies and enter "NA" for those that don't apply. Be aware SAXS to WAXS changeover ~1.5 hrs; WAXS to SAXS or SAXS changeover ~4 hrs.
SAXS: 0.03 nm-1 < q < 0.4 nm-1 SAXS: 0.07 nm-1 < q < 0.9 nm-1 SAXS: 0.10 nm-1 < q < 1.2 nm-1 SAXS: 0.18 nm-1 < q < 2.2 nm-1 WAXS: 1.2 nm-1 < q < 12.5 nm-1 (qmax dependent on sample holder)
What sample environment do you hope to use? Please number in sequence of intended use if more than one environment applies. Enter "NA" if not applicable.
X-Y drivable positioner for foils X-Y drivable positioner for fluids Oven (25 C < T < 450 C) Goniometer for reflection geometry Tensile tester Other or own (please specify)
Turbo Pump Cart - Do you need this item before your beam time starts? Yes No Roughing Pump - Do you need this item before your beam time starts? Yes No
What software will you use: XAScollect SUPER Own
Do you need training on this software? YES, provide specifics below NO
Note: Access to the SSRL internal network is no longer allowed. However, we have provided several red 10baseT cables at each beam line for users who need an internet connection. By attaching a computer to one of these red cables, users will automatically be assigned a temporary IP address (requires that your PC be configured for DHCP). If you have any questions or need assistance, please send an email to : M$network@ssrl.slac.stanfrod.edu or contact Hector Prado at 650-926-4697.
Do you intend to attach a computer to the network? YES (answer question below) NO
Do you need help in configuring your computer? YES NO
Do you need a chiller? YES NO
Heat load (in watts, BTU/hour, or Kcal/hour):
Note: If you get the message "Error: Blank Fields" upon submittal of this form, click the back button on your browser rather than the Fill Out Form link to modify data entry instead of starting over.
